ZYFX pressure water purifier

pressure water purifier 1.high-efficiency 2.Capacity: 5~100T/h 3.Turbidity water: max 500mg/L 4.Out 3mg/L

pressure water purifier1.high-efficiency2.Capacity: 5~100T/h3.Turbidity water: max 500mg/L4.Out 3mg/L

ZYFX-1 integrated water purifier series pressure type, there is a pipe with an improved pass necking network, folding, water reaction, water purification equipment, integrated facilities, the flocculation, clarification and filtration processes combined into a reasonably compact one can easily purify raw water surface water generally meet the health standard of living into the water, mainly used in the vast rural areas, towns, farms, military barracks and institutions for SMEs to improve their living quality of drinking water used for industrial water softening, demineralization water treatment process, but also together to separate the removal of certain suspended solids and colloidal impurities close to neutral for the primary purpose of the production of waste water purification use.This water purifier is applicable to general turbidity of not more than 500mg / l of raw water treatment, short-term raw water turbidity of up to 1000mg / l. Water purifier water turbidity is less than 3mg / l, the working pressure <0.6mpa, single handle water 5 ~ 60m3 / h.Process by1, mixed parts: The "komax" pipe static mixing device (when the water purifier place far away from the water, the suitable "komax" adding coagulant mixing front-end to improve the coagulation effect, subject to the pressure of dosing).2, the reaction components: pipes pass by with improved network, folding the water cycle response.3, to clarify the parts: using both the separation of sludge and sludge recycling characteristics of the suspended contact with contact filtration type water clarification process filtration and separation, and a straight-type oblique to the plate or tube of radiation shaped polypropylene clarified.       4, filter parts: the use of polystyrene bead filter bed filter.5, washing parts: fixed multi-nozzle jet cutting flush system, flushing fully stirred to avoid the spin rinse possible sync. Bead filter to ensure clean and easy to produce equipment failure.6, start some: The impulse to help start the tube, you can punch a few seconds to open the valve, the bottom product from the mud, quickly restored the normal operation of sludge recycling.7, sludge parts: the use of quick opening valves to ensure that mud effects, reduce water loss.Features1, the enhanced flocculation processThis water purifier uses komax pipe water mixed reaction and response to the combination of the traditional tossing the flocculation process, a large alum to shrink, and ramp areas to create good conditions for effective clarification is helpful to improve water quality.2, no moving partsPolystyrene bead layer filter flushing, pump water with a fixed jet flushing pipes with no moving parts than the rotary washing device also simplifies management of routine maintenance work, there was no possibility of water contamination by oil.3, constructed to facilitate loading and unloadingFor the convenience of users in the maintenance of long-term use of clean-up process may be, water purifiers top cover, komax mixed reactor and water pipes inside the jet wash pipe and other connections, are used to facilitate handling of the flange and threaded into the connector.4, user managementTo meet the intermittent operation of the user running the actual needs of the evening stop the pump, return to work the morning before the first impulse to help start the pipe valve to open a few seconds, you can quickly run properly. To prevent the installation and run-time mistake, the different channels and sampling tube body (local) coated with paint of different colors to show the obvious difference: water valves, flush valves and water sampling tubes - blue; the beginning of valves and water treatment precipitation water sampling tube - yellow; reaction zone sampling tube - brown; sludge recirculation valve and sampling tube - black.5, Health rustWater filter inside the wall and water surface of the metal components are non-toxic anti-rust coating layer, to ensure water safety.Key design parameters1, the ramp length: 1000mmm2, the inclined plate angle: 60 degrees3, increase the flow rate ramp area: 2.7 ~ 3mm / s4, the average particle size of polystyrene beads filter: 0.8 ~ 1.2mm5, bead filter capacity: 80kg/m36, filter bead thickness: 450mm7, the filtration rate: 1.8 ~ 2.1mm / s8, wash intensity: 5l/s.m29, flushing duration (net): 3mih

ZYFX pressure water purifier